Best Mortar Bits for Drills: Masonry and Mortar Removal Picks
The best mortar bit for a drill depends on whether you need to make a hole in masonry or remove mortar from a joint. For general drilling, the TITGGI and DYRECELVE carbide sets offer multiple sizes; the DEWALT set is designed for percussion drilling; and WildBossy offers a hex-shank assortment. For tuckpointing and targeted joint cleanup, choose the KURSTOL diamond mortar raking bits instead.
| Product | Best For | Notable Feature |
|---|---|---|
| TITGGI 10-Piece Masonry Set | Versatile household drilling | Carbide tips and several sizes |
| DYRECELVE 12-Piece Set | Step-up drilling with standard drills | Three-flat shanks and size variety |
| DEWALT DW5207 | Percussion drilling in concrete and block | Two-cutter carbide tip |
| KURSTOL Diamond Raking Bits | Removing mortar from joints | Long diamond-coated tuck-point pins |
| WildBossy Hex-Shank Set | Home repairs with a compatible drill | Hex shanks designed to reduce slipping |
TITGGI 10-Piece Masonry Drill Bit Set
This set is best for buyers who want several bit sizes for general drilling across masonry and other listed materials. TITGGI describes the bits as having carbide tips, dual U-shaped grooves for dust removal, and three-flat shanks for a secure hold in compatible drills. The listed applications include cement, brick, ceramic, glass, wood, and hard plastic.
The assortment includes sizes from 1/8 inch to 1/2 inch, with multiple 1/4-inch bits. Starting with a smaller pilot hole and stepping up can help when a larger opening is needed. The product is selected for its broad size range and material list. Avoid choosing it specifically for mortar-joint removal: the features describe drilling bits, not tuck-point pins.
DYRECELVE 12-Piece Masonry Drill Bit Set
DYRECELVE is best for buyers who want a defined assortment for pilot holes and step-up drilling with a standard three-jaw drill chuck. The set has carbide spear-shaped tips, steel bodies, spiral flutes, and three-flat shanks. Its 12 bits cover seven sizes from 1/8 inch to 1/2 inch, including four 1/4-inch bits.
The product information lists use with compatible corded drills, cordless drills, hand drills, and drill presses. It explicitly says the bits are not for SDS rotary hammers or 1/4-inch impact-driver collets, so check the tool connection before buying. This set is selected for its clear size breakdown and chuck compatibility guidance. Use suitable speed, pressure, and cooling for the surface being drilled.
DEWALT DW5207 Percussion Masonry Bit Set
This seven-piece set is best for buyers seeking masonry bits intended for percussion drilling in concrete and block. DEWALT lists a two-cutter carbide tip to increase carbide contact and a four-flute design to clear debris. Three flats on the shank are described as helping reduce slipping in the chuck, with stated exceptions for certain bit models.
It is selected for its concrete-and-block focus and debris-clearing design. The supplied product details do not list the individual bit sizes or explain the drill compatibility beyond the percussion designation. Check those details against your tool and project before purchase, especially if you need a particular hole diameter.
KURSTOL Diamond Mortar Raking Bits
These two diamond raking bits are best for removing mortar from brickwork joints, including hard-to-reach corners and irregular areas. Unlike ordinary masonry bits made to bore holes, these are described as tuck-point pins for controlled mortar removal. The listed diameter is 7.2 mm, and the product details specify a 74 mm diamond height, a 1/4-inch round shank, and a recommended operating range of 2,000–5,000 RPM.
The bits use vacuum-brazed exposed diamonds, according to the product information. They are selected because their stated purpose directly matches mortar removal. A limitation is that the round-shank connection and stated RPM range need to match the user’s drill setup. Avoid treating them as a general-purpose set for drilling a variety of hole sizes.
WildBossy 10-Piece Hex-Shank Masonry Set
WildBossy is best for home repair buyers who want a carbide-tipped masonry assortment with a hex shank. The set includes 10 bits in sizes from 5/32 inch to 1/2 inch. Listed uses include concrete, brick, cement, ceramic tile, glass, and plastic, along with tasks such as installing wall anchors, shelves, fixtures, and bathroom or kitchen hardware.
The hex shank is described as helping reduce slipping in the chuck, and the product is listed for most standard electric drills, cordless drills, and compatible drill drivers. This set is selected for its stated home-improvement applications and shank design. Check that your drill accepts the hex shank, and note that the listed range does not include a 1/8-inch bit.
Buying Guide: How to Choose a Mortar Bit
Are you drilling a hole or removing mortar?
For holes in brick, block, or concrete, compare masonry drill-bit sets such as TITGGI, DYRECELVE, DEWALT, and WildBossy. For clearing mortar from a joint, the KURSTOL product is the purpose-built option in this selection. A standard masonry bit is not the same tool as a long mortar raking pin.
What shank fits your drill?
Check the drill chuck before choosing. DYRECELVE specifies a three-flat shank for compatible three-jaw chucks and excludes SDS rotary hammers and 1/4-inch impact-driver collets. WildBossy uses a hex shank, while KURSTOL lists a round shank. Match the connection to your tool rather than assuming all bits fit every drill.
Which bit sizes do you need?
Choose an assortment that includes the hole diameter required for your anchor, fastener, or fixture. The listed sets reach 1/2 inch, but their smallest sizes and number of duplicate bits differ. DEWALT’s supplied details do not identify its size range, so verify the specifications if diameter is important.
How should you drill masonry?
Use speed, pressure, and cooling appropriate to the material and bit, following the tool and bit instructions. Flutes help carry debris away, but they do not remove the need to clear dust and work carefully. For tile or glass, check the product guidance and use a suitable technique for that surface.
Frequently Asked Questions
Can a masonry drill bit remove mortar between bricks?
A standard masonry bit is designed to drill holes. For removing mortar from joints, use a bit specifically described as a mortar raking or tuck-point tool, such as the KURSTOL diamond pins listed here.
Will these bits fit an SDS rotary hammer?
Do not assume so. DYRECELVE explicitly says its bits are not for SDS rotary hammers. Confirm the shank and chuck requirements for any other set before use.
What does a carbide tip do?
Carbide tips are used on several listed masonry sets for drilling hard materials such as brick, cement, and concrete. The precise performance depends on the bit, drill, surface, and operating technique.
Should I start with a smaller bit?
For a larger hole, starting with a smaller pilot hole and stepping up can be useful. TITGGI and DYRECELVE both describe their size assortments for this kind of staged drilling.