Best Hammer Drill Hole Saw Kits for Concrete and Masonry
The best hammer drill hole saw kit depends on the hole diameters you need and whether your tool accepts an SDS Plus or SDS Max shank. The TGFTGF 15-piece kit is best for a broad size range up to 5 inches; MonoPro is better for users who need both SDS shank types; and METOTY offers seven saw sizes and accessories. These kits are designed for masonry, so check your drill’s chuck and operating instructions before buying.
| Kit | Size range | Standout feature |
|---|---|---|
| TGFTGF 15-Piece | 40–125 mm | Largest listed saw size |
| DAYDOOR 10-Piece | 1-3/16–4 inches | Five common sizes and chip-clearing openings |
| MonoPro 10-Piece | 30–100 mm | SDS Plus and SDS Max shanks |
| YOSIGHT 9-Piece | 30–100 mm | Two SDS shank types |
| METOTY 22-Piece | 30–110 mm | Seven saw sizes and dust bags |
TGFTGF 15-Piece Concrete Hole Saw Kit
Best for: Buyers who need larger masonry openings and want several saw diameters in one kit. The set includes 40, 65, 80, 100, and 125 mm hole saws, making it the widest listed size range among these picks.
The kit includes a 110 mm SDS Plus connecting rod, three centering drill bits, three dust bags, an Allen wrench, and screws. Its steel and tungsten carbide construction is described as wear- and impact-resistant. The 135-degree pilot tip is intended to help with positioning, while the self-tightening thread design is intended to improve stability.
Limitation: The listed connecting rod is SDS Plus only. Avoid this kit if your rotary hammer requires an SDS Max shank and you do not have a suitable adapter.
DAYDOOR 10-Piece Masonry Hole Saw Kit
Best for: DIY masonry projects that call for common openings from 1-3/16 to 4 inches. The five listed diameters are 1-3/16, 1-9/16, 2-9/16, 3-1/8, and 4 inches. The product description identifies uses such as openings for pipes and vent ducting in brick, cement wall, and stone.
DAYDOOR highlights triple-edge tungsten carbide teeth and large chip-clearing holes intended to help remove debris during drilling. The kit is described as including SDS Plus and SDS Max shank adapters, giving buyers a choice of shank type when the included parts match their tool.
Limitation: The provided product details do not specify the full accessory list or shank lengths. Confirm those details on the listing before purchase if they matter for your setup.
MonoPro 10-Piece SDS Plus And Max Kit
Best for: Buyers who want both SDS Plus and SDS Max connecting rods in one set. Its five hole saw sizes are 30, 40, 65, 80, and 100 mm, covering smaller openings through nearly 4 inches.
The package lists one 300 mm SDS Plus shank, one 300 mm SDS Max shank, three pilot drill bits, screws, and a socket wrench. The saws are described as tungsten steel and carbide, with ventilation holes intended to help remove dust. The dual-shank selection makes this a flexible choice when the user has compatible SDS rotary hammers.
Limitation: The listed saws stop at 100 mm. Choose another option if your project requires a larger diameter, such as 125 mm.
YOSIGHT 9-Piece Masonry Hole Saw Kit
Best for: Buyers seeking a compact size range with both SDS Plus and SDS Max shanks. Its five saw diameters—30, 40, 65, 80, and 100 mm—overlap with common smaller masonry-hole needs.
The kit is described as steel and tungsten carbide, with features intended to resist wear and impact. It includes two pilot drills and both shank types. Setup involves inserting the pilot drill, securing it with the screw, and attaching the hole saw, according to the product description.
Limitation: The listed set includes two pilot drills, fewer than some larger kits. It also does not include a saw larger than 100 mm.
METOTY 22-Piece Concrete Hole Saw Kit
Best for: Buyers who want several diameters and multiple connecting-rod options. The seven saw sizes are 30, 40, 50, 65, 80, 100, and 110 mm. The set lists SDS Plus and SDS Max rods in 300 mm lengths, plus an SDS Plus 110 mm rod.
Accessories include three center positioning drill bits, an adaptor bar, three dust bags, Allen wrenches, and screws. The product description says the dust bags are intended to help minimize mess. It also advises using flowing water on harder stone or brick to reduce saw abrasion; follow the tool maker’s safety guidance before using water around powered equipment.
Limitation: The product notes that harder materials may take longer to drill, so this may not suit buyers prioritizing speed through especially hard masonry.
Buying Guide: How To Choose A Hammer Drill Hole Saw
Will the shank fit your drill?
Check the tool manual and chuck before choosing a kit. SDS Plus and SDS Max are different shank formats; a kit listing both does not mean every rod fits every drill. A standard hammer drill with a three-jaw chuck may not accept an SDS shank directly. Confirm the required connection rather than assuming a hole saw is universally compatible.
Which diameter do you need?
Measure the opening required for the pipe, duct, or other installation and compare it with the kit’s listed saw sizes. Choose a set that includes the target diameter. The TGFTGF 15-piece kit reaches 125 mm, while the METOTY set reaches 110 mm; MonoPro and YOSIGHT stop at 100 mm.
Do you need a longer connecting rod?
Connecting-rod length can affect access to the work area. MonoPro lists 300 mm rods for both SDS types, while the TGFTGF 15-piece kit lists a 110 mm SDS Plus rod. Compare the listed length with the depth and clearance needed for the job.
What materials and safety details matter?
These selections are described for materials such as concrete, brick, cement, block, or stone, but material hardness can affect drilling progress and tool wear. Use the correct mode and accessories specified by the drill manufacturer. Secure the work area, wear eye and hearing protection, and manage masonry dust with suitable controls. Do not use water unless the tool and work method are designed for it.
Frequently Asked Questions
Can I use a masonry hole saw with any hammer drill?
No. Check whether the drill accepts the kit’s SDS Plus or SDS Max shank. A standard chuck may require a compatible connection, and not every adapter is suitable for every tool.
What is the difference between SDS Plus and SDS Max?
They are different shank formats used by compatible rotary hammers. Select the shank that matches your tool’s chuck and manufacturer instructions.
Which kit includes the largest hole saw?
The TGFTGF 15-piece kit lists a 125 mm hole saw, the largest diameter among the five selected kits.
Are these hole saws intended for wood or metal?
The selected products are described for masonry materials such as concrete, brick, cement, block, or stone. Their supplied details do not establish suitability for wood or metal.