Best Spiral Blades for Scroll Saws for Intricate Cuts
Spiral scroll saw blades cut in multiple directions, making them useful for intricate curves and designs where turning the workpiece is inconvenient. The WEN #2 is best for fine, detailed work; FOXBC #5 and #7 blades offer different tooth sizes for wood cutting; Flying Dutchman is a larger variety pack; and the Marsrut set is a blade-holder accessory for a specific size. Check blade style and dimensions against your saw before choosing.
| Product | Best For | Key Detail |
|---|---|---|
| WEN BLX241 #2 | Fine, intricate cuts | 41 TPI, pinless, 12 blades |
| FOXBC #5 | General detailed cutting | Plain end, spiral design |
| FOXBC #7 | Wood cutting with a different tooth size | Plain end, spiral design |
| Marsrut Holders | Compatible blade-holder replacement or conversion | For specified 133 mm blade size |
| Flying Dutchman Variety Pack | Trying multiple blade options | 60 pinless blades |
WEN BLX241 #2 Spiral Blades
The WEN BLX241#2 pack includes 12 pinless spiral blades. Each blade has 41 teeth per inch and measures 0.035 inches in diameter. Its spiral design cuts in any direction, a useful feature for sharp corners and detailed workpieces where rotating the material can be awkward.
Best for: Buyers seeking a fine-tooth option for intricate work. The stated 41 TPI and relatively small diameter make this the most specifically detailed blade in this selection. Choose it if those specifications suit your project and saw setup.
Limitation: The listing identifies these as pinless blades, so confirm that your saw accepts that blade style before purchasing.
FOXBC #5 Spiral Blades
This FOXBC option is a 5-inch, plain-end spiral blade described as having 360-degree cutting capability. The product information lists wood, plastic, wax, non-ferrous metals, plaster, bone, and horn among possible materials. It also notes that cutting speed and finish depend on material thickness and teeth per inch.
Best for: Users who want a #5 wood-cutting blade and the flexibility to cut in different directions without turning the workpiece. It is also listed for power scroll saws and handheld fret or jeweler’s saw frames.
Limitation: The listing does not specify a teeth-per-inch figure in the supplied details. Match the blade to the material and desired finish rather than assuming a particular cutting speed.
FOXBC #7 Spiral Blades
The FOXBC #7 is a 5-inch, plain-end spiral blade with 360-degree cutting capability. Like the #5, it is listed for intricate curves and joints in materials including wood, plastic, wax, non-ferrous metals, plaster, bone, and horn. The product description says users do not have to turn the workpiece to change cutting direction.
Best for: Buyers who specifically want a #7 spiral blade for wood cutting. Comparing it with the #5 lets shoppers select the listed blade number that better fits their project and saw setup.
Limitation: The provided product details do not state its TPI or blade diameter. Verify the size and the blade number your saw and project require before ordering.
Marsrut Pinless Blade Holders
This item is an accessory, not a pack of spiral blades. It includes two upper and lower pinless blade holders or clamps, made from stainless steel. The stated fitment is for a blade measuring 133 × 0.7 × 0.7 mm, also described as 5.24 × 0.03 inches.
Best for: Scroll saw owners looking for holders compatible with that specified blade size. It may be relevant when adapting or replacing holders, but the dimensions should be checked carefully against the saw and blade.
Limitation: Do not choose this as a blade purchase. The listing specifies holders, and fitment is limited to the stated size; verify measurements before buying.
Flying Dutchman 60-Piece Variety Pack
This pack contains 60 pinless spiral scroll saw blades, each described as 5 inches long. The product details identify them as milled blades with a sharper cutting edge and say they are made in Germany from hardened steel.
Best for: Buyers who want a larger assortment of spiral blades rather than a 12-blade pack. The quantity makes it a practical option for users who expect to keep multiple blades available for ongoing projects.
Limitation: The supplied details do not specify the individual blade sizes or TPI in the assortment. Check the listing details to confirm that its variety matches your needs.
Buying Guide: How to Choose a Spiral Scroll Saw Blade
What blade style does your saw accept?
Check whether your saw takes pinless blades or another mounting style. The WEN and Flying Dutchman products are described as pinless, while the FOXBC blades have plain ends. Confirm that the blade ends fit your saw’s clamps before ordering. A blade that cuts in all directions still needs a compatible mounting system.
Which blade number and tooth count should you choose?
Compare blade numbers and stated tooth information with the material and detail level you need. The WEN #2 listing specifies 41 TPI and a 0.035-inch diameter. The FOXBC products are identified as #5 and #7, but the supplied details do not give their TPI. Do not assume the listed numbers alone provide every dimension you need.
Do you need a spiral blade or a blade holder?
A spiral blade’s teeth are arranged to cut in multiple directions, which can reduce the need to rotate a workpiece during intricate cuts. A holder is a separate saw component. The Marsrut product includes clamps, not blades, and is intended for a specific stated size.
What should you check for different materials?
FOXBC lists several materials, including wood, plastic, wax, non-ferrous metals, plaster, bone, and horn. The product information cautions that speed and finish depend on material thickness and TPI. Select a blade based on the material and desired cut, and follow the saw manufacturer’s operating guidance.
Frequently Asked Questions
What is a spiral scroll saw blade used for?
A spiral blade cuts in multiple directions, which can help with intricate curves and designs without repeatedly turning the workpiece.
Are pinless and plain-end blades the same?
Product descriptions may use these terms for blade ends without cross pins, but check your saw’s requirements and the blade listing to confirm fit.
Which product has a stated teeth-per-inch count?
The WEN BLX241#2 is listed at 41 TPI. The provided details for the FOXBC #5 and #7 do not state their TPI.
Can I use the Marsrut holders as scroll saw blades?
No. The Marsrut item is a set of blade holders or clamps, not a pack of cutting blades.
Should I choose the FOXBC #5 or #7?
Choose based on the blade number required for your project and saw setup. The supplied information does not provide enough TPI or diameter detail to compare their cutting performance directly.