Best Masonry Bolts for Brick: Five Concrete Fastener Options
The best masonry bolts for brick depend on the hole size, fastening depth, and whether you need a few screws or a larger assortment. Concrete screws are a direct option for suitable masonry when installed in a properly drilled hole. The 100-piece hex-head kit is best for repeat general-purpose jobs; the Wensilon large-diameter screw is better for projects calling for a larger fastener; and the assorted kits suit buyers who need multiple sizes. Check the product’s dimensions and installation requirements before choosing.
| Product | Best For | Notable Detail |
|---|---|---|
| 100-piece hex-head concrete screw kit | Repeat DIY and general-purpose fastening | Includes drill bit and screwdriver bit |
| VGBUY conical anchor assortment | Projects needing anchors and screws in different sizes | Includes two drill bits |
| Wensilon 30-piece hex concrete screws | Small, straightforward masonry jobs | 3/16-inch by 1-1/4-inch screws |
| Wensilon 3/8-inch large-diameter screw | Projects specified for a larger fastener | 3-inch length |
| Wensilon 105-piece assortment | Projects that need multiple screw lengths | Three lengths and three finishes |
100-Piece Hex-Head Concrete Screw Kit
This kit contains 100 blue 3/16-by-1-1/4-inch concrete screw anchors, one drill bit, and one screwdriver bit. The listed applications include concrete, masonry, brick, block, mortar, wood, drywall, and stucco. Its high- and low-thread design and serrated threads are described as helping the screw penetrate base materials.
Best for: Homeowners and DIYers who expect to install multiple fasteners and want the listed driver and drill accessories included. It was selected for its large quantity and stated range of applications. The fixed 1-1/4-inch length may not suit every mounting depth, so check the project’s requirements before buying.
VGBUY Conical Anchor And Screw Assortment
The 180-piece set includes 90 PE conical anchors, 90 galvanized flat-head screws, and two drill bits. It combines two anchor sizes with two screw sizes: 1.38-inch anchors with 1.58-inch screws, and 1.06-inch anchors with 1.18-inch screws. The listing identifies brick, concrete, stucco, tile, and cinder block among its applications.
Best for: Buyers who want a variety of anchor-and-screw combinations for different wall-mounting tasks. The product listing claims holding strength up to 75 pounds, but that figure should not be treated as a universal safe load; results depend on the material, installation, and application. Avoid choosing it solely by the stated load claim when a project has specific load requirements.
Wensilon 30-Piece Hex Concrete Screws
This pack contains 30 slotted hex concrete screws measuring 3/16 by 1-1/4 inches. The manufacturer describes them as hardened carbon steel with a blue rust-resistant finish. Listed uses include concrete, masonry, and mortar walls.
Best for: Small jobs where a consistent screw size and hexagonal head are suitable. It was selected as a simpler option for buyers who do not need multiple lengths or a large assortment of installation accessories. The listing does not specify an included drill bit, so plan to obtain the appropriate drilling equipment separately if needed.
Wensilon 3/8-Inch Large-Diameter Screw
This 10-piece pack contains 3/8-by-3-inch concrete screws. The listing describes a hardened carbon-steel anchor body with zinc plating and says to use a 3/8-inch hammer drill to open the hole before installation. It is intended for anchoring to masonry, brick, or block.
Best for: Buyers whose project specifically calls for a larger-diameter, longer concrete screw. Its listed dimensions distinguish it from the smaller 3/16-inch options. The product information provides a particular drilling instruction, but does not state a load rating; do not assume the larger size alone establishes suitability for a heavy load.
Wensilon 105-Piece Multi-Size Assortment
This assortment includes 105 hardened-steel, 3/16-inch screws in three lengths: 1-1/4, 1-3/4, and 2-1/4 inches. The screws come in blue, black, and white finishes, and the kit includes a driver bit. The listed applications include concrete, brick, block, and stucco, including mounting brackets, electrical boxes, fixtures, and signs.
Best for: DIYers who need several screw lengths or want different finish colors for a project. It was selected for its size range and included driver bit. All listed screws share the same 3/16-inch diameter, so choose another option if the project specifies a different diameter.
Buying Guide: How To Choose Masonry Screws For Brick
Do you need a concrete screw or an anchor-and-screw set?
Concrete screws are a direct fastening option for masonry when installed according to the product instructions. A conical anchor kit pairs a plastic anchor with a screw and offers different combinations. Compare the mounting method required by your fixture and the product’s specified materials before deciding.
What length and diameter should you choose?
Match the fastener dimensions to the project’s instructions and the material being fastened. The products here range from 3/16-inch screws to a 3/8-inch screw, and from 1-1/4-inch to 3-inch lengths. Do not assume one size works for every brick wall or fixture.
What installation details matter?
Check the required drill-bit size, whether a bit is included, and the head or driver style. Drill the hole as directed by the product manufacturer, and make sure the fastener is intended for the specific masonry material. Brick, mortar, and block are not interchangeable in every installation.
Should you buy a kit or a single size?
Choose a kit when you need multiple sizes, screws, or accessories for several tasks. A single-size pack can be a simpler match for a project with known specifications. Finish color may help coordinate with visible hardware, but it does not replace checking dimensions and application requirements.
Frequently Asked Questions
Can concrete screws be used in brick?
Some products in this selection list brick among their intended applications. Confirm that the chosen screw is specified for brick and follow its installation instructions.
Are masonry screws and wall anchors the same?
No. A masonry screw is a fastener designed for use in masonry. An anchor-and-screw kit uses a separate anchor that receives a screw.
Does every kit include a drill bit?
No. The 100-piece kit, VGBUY assortment, and Wensilon 105-piece assortment list drill bits or a driver bit. Check the individual product details for what is included.
Can I use a listed load claim for any brick wall?
No. A load claim is not a universal guarantee. Material condition, installation, fastener choice, and the mounted object affect suitability.