Best 1 1/4-Inch Screws for Decking, Woodworking, and Repairs
For outdoor decking and treated lumber, choose a #8 x 1-1/4-inch deck screw with a corrosion-resistant coating and a drive that resists slipping. Deck Plus is suited to smaller jobs needing a tan finish; LIONMAX offers a larger 500-piece pack; and FMhotu is another 100-piece option. FIXLINK includes 1-1/4-inch screws in a mixed-size kit. One listed product is only 1/4 inch long, so it is not a substitute for a 1-1/4-inch screw.
| Product | Size match | Best suited for |
|---|---|---|
| Deck Plus Torx Deck Screws | #8 x 1-1/4 inch | Outdoor projects and treated lumber |
| LIONMAX Deck Screws | #8 x 1-1/4 inch | Projects needing a 500-piece pack |
| FMhotu Deck Screws | #8 x 1-1/4 inch | Small decking and landscaping jobs |
| FIXLINK Wood Screw Assortment | Includes 1-1/4 inch | Repairs needing several screw sizes |
| DTGN Black Screws | 1/4 inch long | Small fastening tasks, not 1-1/4-inch needs |
Deck Plus #8 x 1-1/4-Inch Torx Screws
Best for: Decking, fencing, and treated-lumber projects that call for a corrosion-resistant #8 x 1-1/4-inch screw. The 186-piece pack is a practical middle ground between a small repair quantity and a bulk pack.
The screws have a four-layer epoxy coating and a self-drilling point with coarse threads. The manufacturer says the point is designed to eliminate the need for a pilot hole. A T25 bit is included, and the six-contact-point Torx drive is intended to reduce slipping and cam-out while driving.
Why it stands out: It combines the exact requested length with features aimed at outdoor wood fastening. The tan finish may suit projects where a lighter screw head is preferred. Limitation: The pack contains fewer screws than the LIONMAX 500-piece option.
LIONMAX 500-Piece Deck Screws
Best for: Larger deck, fence, or outdoor wood projects that need many #8 x 1-1/4-inch screws. Its 500-piece quantity reduces the need to combine multiple packs for a substantial job.
LIONMAX lists a black epoxy coating, a flat head, a coarse thread, and a self-tapping point. The product description says the screws are intended for outdoor exposure, including humidity, rain, and snow. A T25 star bit is included; the star drive has six contact points and is designed to limit stripping and cam-out.
Why it stands out: It pairs the correct length with a large pack and outdoor-oriented features. Limitation: The black finish may be more visible than a tan or gold screw on some wood surfaces. The listing’s salt-spray claim is manufacturer-provided, not an independent comparison.
FMhotu Gold Star-Drive Deck Screws
Best for: Smaller decking, timber, log, or landscaping projects where a 100-piece pack is sufficient. These are listed as #8 x 1-1/4-inch screws, making them a direct size match.
The listing describes alloy-steel construction, a rust-resistant coating, and serrated threads intended to improve grip. It also identifies the screws for outdoor use with ACQ-treated lumber. A T20 star bit is included, which is a different drive size from the T25 bits supplied with the Deck Plus and LIONMAX options.
Why it stands out: It offers the requested length in a smaller quantity and a gold finish. Limitation: Confirm that your driver bit matches the included T20 bit; do not assume all star-drive screws use the same size.
FIXLINK Mixed-Size Wood Screw Kit
Best for: Home repair and woodworking when one project—or a supply kit—needs multiple screw lengths. The 240-piece set includes #8 x 1-1/4-inch screws among eight listed sizes, plus M7 screw anchors.
FIXLINK describes the screws as having sharp tips and clear, deep threads intended to fasten into wood and plastic. The set is organized by size in a portable plastic storage box, which can make it easier to locate the length needed for a repair.
Why it stands out: It provides the target length alongside shorter and longer options. Limitation: The listing does not specify the number of 1-1/4-inch screws in the assortment, and this is not a dedicated deck-screw pack with the same stated outdoor coating features as the deck-specific products.
DTGN Black Screws: Check The Length
Best for: Small fastening tasks that specifically call for a 1/4-inch screw, not a 1-1/4-inch screw. The listing describes 100 black self-tapping screws, with a Phillips cross drive and countersunk head designed to sit flush.
The product information identifies the size as #4 x 1/4 inch and describes 304 stainless steel with a black oxide coating. Its short length makes it materially different from the deck screws above.
Why it is included:** It helps prevent a common size-selection mistake when searching for “inch and a quarter screws.” Limitation: Do not choose this product if the project requires a screw that is one and one-quarter inches long.
Buying Guide: How To Choose 1-1/4-Inch Screws
Does “1-1/4 inch” mean the screw’s length?
Yes. A 1-1/4-inch screw is one and one-quarter inches long. Check the listing’s stated length carefully: the DTGN listing says 1/4 inch, which is one-quarter inch and not the same size. Also check the screw number, such as #8, because length alone does not describe diameter.
What should I choose for outdoor decking?
Compare the coating, drive type, and intended use. Deck Plus and LIONMAX list epoxy coatings, while FMhotu describes a rust-resistant finish. These products also specify self-tapping or self-drilling points and star drives. Follow the screw maker’s guidance and the requirements of your lumber and project.
How many screws should I buy?
Match pack quantity to the project and account for the exact count of the size you need. The dedicated options list 100, 186, or 500 screws. FIXLINK has 240 screws across eight sizes, but its listing does not state the count of 1-1/4-inch screws specifically.
Does the star-bit size matter?
Yes. The listed Deck Plus and LIONMAX products include T25 bits, while FMhotu includes a T20 bit. Use the bit size specified for the screw to help maintain engagement and reduce the chance of slipping.
Frequently Asked Questions
Are 1-1/4-inch screws suitable for decks?
Some products in this comparison are explicitly described for decking, including Deck Plus, LIONMAX, and FMhotu. Choose based on the project requirements, coating, screw size, and manufacturer directions.
Are #8 x 1-1/4-inch screws the same as 1/4-inch screws?
No. The first measurement is one and one-quarter inches long; 1/4 inch is one-quarter inch long. These are very different lengths.
Do self-drilling screws always eliminate pilot holes?
Not necessarily for every material or application. Deck Plus says its self-drilling point is designed to eliminate pilot holes. Check the product instructions and project conditions before driving screws without pre-drilling.
Which option includes the most screws?
LIONMAX lists 500 screws. FIXLINK lists 240 pieces across multiple screw sizes and anchors, so the number of 1-1/4-inch screws in that kit is not specified.