Best Boom Saw Options for Skid Steer Tree Work
A true skid steer boom saw uses a powered cutting head on an extended boom, but none of the listed products is a boom saw. The closest match is the Titan Attachments tree boom, a lifting jib rather than a saw. For other tree-work tasks, the MIVA grapple handles logs, the ATS POWER tree puller removes trees and posts, and the MMS forestry mulcher cuts vegetation. The compact MMS loader is a machine, not an attachment. Compare the intended job and confirm carrier compatibility before buying.
| Product | Best For | What It Does |
|---|---|---|
| Titan Attachments 5 FT Tree Boom | Lifting and positioning | Provides a jib-style lifting point |
| MIVA 66-Inch Log Grapple | Moving logs | Clamps and rotates logs |
| ATS POWER Tree Puller | Removing small trees and posts | Uses hydraulic jaws to pull |
| MMS Forestry Mulcher | Clearing brush and small trees | Hydraulically powers a cutting head |
| MS380L Mini Wheel Skid Steer | Compact-site loader work | Provides the carrier machine |
Titan Attachments 5 FT Tree Boom
Best for: Buyers who need a lifting point for handling tree sections or other loads, not powered cutting. This product is the closest match to the “boom” part of a boom saw because it is a five-foot tree boom attachment with a listed 3,500-pound rating.
It uses a universal skid steer quick-tach mounting system and has a two-piece design intended to simplify installation and storage. Two laser-cut hole entries allow chains or a clevis hook to be attached. Choose this if the job is lifting or positioning material. It was selected because it is the only listed product specifically described as a tree boom.
Limitation: The supplied features describe a jib or lifting attachment, not a saw, hydraulic cutting head, or complete boom-saw system. Check the machine’s capacity and the attachment instructions for the intended load and setup.
MIVA 66-Inch Rotating Log Grapple
Best for: Moving, positioning, and stacking logs after cutting. The grapple is listed with a 66-inch arm, 360-degree rotation, and a 2,400-pound lift capacity. Serrated braces and tines are designed to grip logs and reduce slipping during handling.
Choose this over a tree boom when controlled log gripping and rotation are the priority. The product is aimed at logging, land clearing, and sawmill tasks, including maneuvering in tight spaces. It was selected as a practical companion for tree work because it handles material once it has been cut or gathered.
Limitation: It is a grapple, not a cutting attachment. The listed features do not specify the hydraulic flow or pressure requirements, so confirm those details and carrier compatibility before purchase.
ATS POWER Skid Steer Tree Puller
Best for: Removing smaller trees and fence posts rather than sawing them. The listing says it can pull trees up to six inches in diameter and fence posts up to eight inches. A 2.5-by-8-inch hydraulic cylinder supplies pulling force, while serrated jaws grip trunks, roots, and posts.
Choose this if the goal is extraction and the material is within the stated dimensions. It was selected because tree pulling is a distinct land-clearing task that may be relevant to someone comparing skid steer tree attachments.
Limitation: This attachment pulls rather than cuts, and its stated tree-size limit is six inches in diameter. Soil, roots, and job conditions can affect removal; do not treat the listed dimensions as a guarantee for every site.
MMS Mini Skid Steer Forestry Mulcher
Best for: Cutting and mulching shrubs, small trees, and dense vegetation across a 33-inch working width. The attachment has 19 removable teeth, a hydraulic drive motor, reinforced steel construction, and a stated hydraulic flow range of 9–29 GPM.
Among these listings, this is the closest option for powered vegetation cutting, although it is a mulcher rather than a boom saw. Choose it if the job is clearing brush at ground level and the carrier can supply the required flow. It was selected because its hydraulic cutting function is more relevant to clearing than the lifting and gripping attachments.
Limitation: The listing describes a 33-inch mulching attachment, not an elevated saw on an extendable boom. Confirm hydraulic flow and mounting fit before selecting it.
MS380L Mini Wheel Skid Steer Loader
Best for: Buyers looking for a compact stand-on loader rather than a boom-saw attachment. The listing specifies a 23 HP RATO gasoline engine, a detachable bucket, and a foldable foot pedal. It describes use in compact spaces such as courtyards, warehouses, farms, and gardens, with the bucket replaceable by other attachments.
This machine is included as the carrier option in the supplied selection. Choose it only if you need a loader and are evaluating compatible attachments separately. The product listing mentions work such as drilling, excavation, pruning, and mixing, but does not establish compatibility with any specific attachment above.
Limitation: This is a loader, not a boom saw or tree-cutting attachment. Verify attachment fit and hydraulic requirements with the seller before planning a tool combination.
Buying Guide: How To Choose A Skid Steer Tree Attachment
Do you need a saw, a boom, or a material handler?
Start with the task. A boom saw cuts branches or trees from an extended position. A tree boom or jib lifts loads; a grapple grips and moves logs; a puller extracts trees or posts; and a mulcher cuts vegetation into smaller material. These tools are not interchangeable. The listed tree boom does not include a saw, so buyers specifically seeking elevated cutting should look for a product explicitly described as a powered boom saw.
What should you check for machine compatibility?
Confirm the mounting interface and the carrier’s rated operating capacity. For hydraulic attachments, compare the machine’s flow and pressure with the attachment requirements. The listed mulcher specifies a 9–29 GPM flow range, while the supplied grapple details do not state a flow requirement. Ask the seller for missing specifications instead of assuming that a quick-tach fit means the hydraulics are suitable.
Which attachment suits each stage of tree work?
- For lifting or positioning, consider a tree boom, while staying within the machine and attachment limits.
- For gripping and stacking cut logs, consider a rotating grapple.
- For extracting small trees or posts, consider a puller within its stated size limits.
- For brush and vegetation reduction, consider a mulcher with a compatible hydraulic flow supply.
Frequently Asked Questions
Is the Titan tree boom a skid steer boom saw?
No. Its listed features describe a five-foot lifting boom with attachment points for chains or a clevis hook. They do not describe a powered saw.
Which listed product actually cuts vegetation?
The MMS forestry mulcher is described as a hydraulic cutting attachment for shrubs, small trees, and dense vegetation. It is not an elevated boom saw.
Can the listed grapple cut or pull trees?
The MIVA grapple is described for gripping, moving, and positioning logs. The supplied features do not describe cutting or tree extraction.
What hydraulic flow does the listed mulcher require?
The product details state a required flow range of 9–29 GPM. Confirm that the intended carrier can supply the required flow before purchase.