Best 17 Gauge Stucco Netting Options for Stucco and Wall Reinforcement
For conventional stucco lath, compare metal netting by its gauge, mesh, finish, and whether it is self-furred. The listed products do not include a verified 17-gauge option: the closest metal stucco product is labeled 20 gauge, while three alternatives are fiberglass reinforcement mesh rather than metal lath. The guide below identifies what each product is suited for and where its listed specifications differ from a 17-gauge search.
| Product | Best suited for | Key distinction |
|---|---|---|
| SIMBA STEEL galvanized stucco netting | Large stucco areas needing metal mesh | 20-gauge listing; 1-inch mesh |
| Boen fiberglass stucco mesh | EIFS, plaster, and wall reinforcement | Non-adhesive fiberglass |
| Altovexis fiberglass mesh | Crack repair and reinforcement | 40-inch by 160-foot roll |
| Kerty fiberglass mesh | Higher-density plaster reinforcement | 160 g/m² listed |
| JUNKOGO garden netting | Garden and animal protection | Not stucco lath |
SIMBA STEEL Galvanized Stucco Netting
This is the closest match in the list for buyers seeking traditional metal stucco netting. It is a 36-inch-by-150-foot roll of hot-dipped galvanized hexagonal mesh, with a 1-inch mesh opening and a listed 20-gauge specification. The product description also identifies a 1/8-inch self-furred design and reverse-twist weaving.
Best for: Large stucco jobs where a long roll of galvanized metal mesh is appropriate. The long roll can cover a substantial area, and the galvanized finish is described as providing rust protection.
Limitation: It is listed as 20 gauge, not 17 gauge. Buyers who specifically require 17-gauge material should verify the required specification before choosing it.
Boen Fiberglass Stucco Mesh
Boen’s 48-inch-by-150-foot roll is fiberglass reinforcement mesh, not metal stucco netting. The listing describes it as 4.5-ounce, non-adhesive mesh intended for stucco, EIFS, plaster walls, and ceilings. It is described as alkali-resistant and cuttable to the size or shape needed.
Best for: Buyers reinforcing compatible plaster or EIFS assemblies who want fiberglass mesh rather than metal lath. Its wide roll and listed alkali resistance make it relevant to wall reinforcement applications.
Limitation: Fiberglass mesh is not a substitute for 17-gauge metal netting when a project specification calls for metal lath. Confirm the mesh type required by the assembly.
Altovexis Fiberglass Mesh Roll
This 40-inch-by-160-foot product is described as a 4.5-ounce fiberglass mesh roll for reinforcing plaster, concrete, and wall surfaces. Its listed features include flexibility, tensile strength, resistance to tearing, and resistance to alkaline materials such as cement and gypsum. The listing says it can be used indoors and outdoors and cut to size.
Best for: Buyers seeking a broad fiberglass roll for crack reinforcement or plaster repair. The stated dimensions offer more length than the 150-foot fiberglass options in this list.
Limitation: The listing also refers to a “self-adhesive” reinforced mesh pad, while the product name identifies a non-adhesive fiber patch. Check the product details to confirm the format you need. It is not 17-gauge metal netting.
Kerty High-Density Fiberglass Mesh
Kerty’s mesh measures 3.2 feet by 164 feet and is listed at 160 g/m². The product description identifies a non-adhesive fiberglass weave with a polymer coating, alkali resistance, and resistance to tearing and tensile stress. It is presented for plastering, insulation, and crack prevention in interior and exterior building applications.
Best for: Buyers who need a long fiberglass reinforcement roll and want the stated area weight as a comparison point. Choose it when fiberglass reinforcement is suitable for the wall system.
Limitation: The 160 g/m² rating describes fiberglass mesh, not metal gauge. Do not treat it as equivalent to 17-gauge steel or galvanized stucco lath.
JUNKOGO Heavy-Duty Garden Netting
This 15-by-20-foot product is woven garden netting with a half-inch mesh opening. Its listed uses include protecting plants, fruit trees, and vegetables from animals and birds. The description says it can be cut to size and allows watering through the netting.
Best for: Garden protection, not stucco work. It is included only as a clear distinction from products that are actually intended for wall reinforcement.
Limitation: The listing does not identify it as stucco lath, metal netting, or a 17-gauge construction material. Do not choose it for embedding in a stucco assembly.
Buying Guide: How To Choose Stucco Netting
Do you need metal lath or fiberglass mesh?
Start with the project specification. Metal lath and fiberglass reinforcement mesh are different materials and are not interchangeable just because both are called mesh. For conventional stucco lath, look for a product explicitly described as metal stucco netting or lath. For systems that call for fiberglass reinforcement, compare mesh dimensions, weight, alkali resistance, and whether the mesh is adhesive or non-adhesive.
How should you compare gauge and mesh size?
Gauge refers to material thickness, while mesh size refers to the openings between strands. They describe different properties. The metal option listed here specifies 20 gauge and 1-inch mesh; it does not verify 17-gauge construction. If your plans call for 17 gauge, confirm the gauge and product type directly before ordering.
What roll size and finish should you check?
Compare the roll width and length with the area to be covered, allowing for layout and overlap requirements specified for your installation. For metal netting, check the stated finish; the SIMBA STEEL listing describes hot-dipped galvanizing for rust protection. Follow project requirements and installation instructions rather than assuming one mesh or finish suits every application.
Frequently Asked Questions
Is any listed product 17-gauge stucco netting?
No. The closest metal stucco product is listed as 20 gauge. The other relevant wall products are fiberglass mesh and do not have a metal gauge specification.
Is 20-gauge stucco netting the same as 17 gauge?
No. They are different gauge specifications. Check the project documents and confirm the required material thickness before purchasing.
Can fiberglass mesh replace metal stucco lath?
Not automatically. Use fiberglass mesh only when the wall system or project specification calls for that type of reinforcement.
Which listed product is most relevant to traditional stucco netting?
The SIMBA STEEL product is the only listed metal stucco netting option. It is described as galvanized hexagonal mesh, but it is listed as 20 gauge rather than 17 gauge.