Best 1-Inch Cement Board Screws for Backer Board Projects
The best choice depends on whether you need an exact 1-inch length or a screw specifically described for cement board. The Power Pro options are 1 inch long but are listed as multi-material screws, not dedicated cement-board fasteners. For a purpose-listed cement board screw, consider the Hard-to-Find Fastener or Jake Sales options, which are longer. Check your board and framing requirements before choosing: screw length should suit the materials being fastened, and the products below are not all the same type.
| Product | Length | Best for |
|---|---|---|
| Power Pro Bronze | 1 inch | General-purpose projects needing the exact length |
| Power Pro Black | 1 inch | Bulk multi-material fastening |
| Hard-to-Find Fastener | 1-1/4 inches | Purpose-listed cement board fastening |
| Jake Sales | 1-1/4 inches | Cement board attached to wood |
| Backer-On | 1-5/8 inches | Backer-board installation needing a longer screw |
Power Pro Bronze 1-Inch Multi-Material Screws
These #6 x 1-inch screws come in a 320-count pack and are designed for wood, metal, concrete, drywall, and plastic. The product features a Torx drive, flat head, hi-lo serrated threads, spiral flutes, and a pyramid point. Pre-drilling is not required for several listed materials, though it is recommended for concrete and masonry.
Best for: Buyers who need an exact 1-inch screw for general multi-material work and want a larger pack. It is included because its length matches the search, but its listing does not identify it as a dedicated cement-board screw. Avoid choosing it solely for a cement-board installation without confirming it suits the board and framing.
Power Pro Black 1-Inch Multi-Material Screws
This 320-piece pack contains #6 x 1-inch screws intended to replace standard wood, sheet-metal, and concrete or masonry screws across multiple materials. The listing highlights a black epoxy coating with four layers of corrosion protection. It does not specify a cement-board-specific head or installation recommendation.
Best for: Buyers seeking an exact 1-inch length and a bulk quantity for varied projects. The coating is a stated feature, but the product is described as multi-material hardware rather than a dedicated backer-board fastener. Choose it only when the screw type and length meet the requirements of your particular installation.
Hard-to-Find Fastener Cement Board Screws
These #8 x 1-1/4-inch steel fasteners are specifically listed for cement board. The sharp self-piercing tip creates a pilot hole without pre-drilling, and a fine ceramic coating is described as providing corrosion resistance in high-moisture environments. The pack contains 157 screws.
Best for: DIYers who prioritize a product explicitly identified as a cement-board fastener over an exact 1-inch length. It is longer than the requested size, so check the board and framing specifications before buying. Its Phillips drive may also be a deciding factor if you prefer that drive type.
Jake Sales 1-1/4-Inch Torx Cement Board Screws
Jake Sales lists these 10 x 1-1/4-inch screws for fastening cement board to wood. They are made from heat-treated steel and described as corrosion-resistant with a ceramic coating. The product listing names several backer-board brands and specifies a Torx or star head with a T-25 drive.
Best for: Buyers installing cement board over wood who want a screw marketed for that job and prefer a star drive. It is not a 1-inch screw, and the stated use is fastening to wood, so do not assume it is the right selection for other framing materials.
Backer-On Hardie Backer Screws
This 575-count option is 9 x 1-5/8 inches, considerably longer than 1 inch. The listed features include a serrated head designed to countersink, a star drive paired with a T-25 bit, and a sharp point intended for immediate pickup without pre-drilling.
Best for: Buyers whose backer-board project calls for a longer screw and who value a countersinking head and star drive. It is included as a backer-board-specific comparison, not as an equivalent to a 1-inch fastener. Confirm the required length before selecting it.
Buying Guide: How to Choose Cement Board Screws
Is a 1-inch screw the right length?
Length alone does not determine whether a screw is suitable. Consider the thickness of the cement board, the material beneath it, and the fastening instructions for the board and project. The products here range from 1 to 1-5/8 inches, so they are not interchangeable by default. If a manufacturer or project plan specifies a fastener length, use that requirement as your guide.
Should you choose a dedicated cement-board screw?
A screw described specifically for cement board provides clearer intended-use information than a general multi-material screw. The Power Pro products in this list are exactly 1 inch long, but their supplied features describe broad material use rather than dedicated cement-board installation. The Hard-to-Find Fastener and Jake Sales products are explicitly listed for cement board, but both are 1-1/4 inches.
Which drive and coating matter?
Drive type affects the tool needed: the listings include Phillips and Torx or star drives. Coatings also differ. The cement-board options describe ceramic coatings, while the black Power Pro option lists an epoxy coating. Compare the stated features with the environment and installation instructions; do not infer suitability beyond the product information.
Frequently Asked Questions
Are these all 1-inch cement board screws?
No. The two Power Pro options are 1 inch long but are listed as multi-material screws. The other three products are longer and include options specifically described for cement board or backer board.
Which listed screw is specifically made for cement board?
The Hard-to-Find Fastener and Jake Sales products are explicitly described for cement board. The Backer-On product is described for Hardie Backer board.
Can I use a 1-inch screw for every cement board project?
No. The suitable length depends on the board, the material underneath, and the installation requirements. Verify the specified fastener length before purchasing.
Which option is intended for fastening cement board to wood?
Jake Sales specifically describes its 1-1/4-inch screws for fastening cement board to wood. Follow the project’s requirements to confirm the size is appropriate.